Silex technology Print/Scanner/Storage Wireless Server PRICOM C-6400W Guide d'installation télécharger pdf (Page 71)

9Appendix

Users Manual CX2

Write configuration information using an editor.

1. Connect the USB memory your PC.

2. Description of configure file.

You can create a description file in Windows notepad.

The following is a description of the format.

Format

----------------------------------------------------------------

silex

Wireless Mode = 1

SSID = GROUP

Channel = 11

USE WEP = 0

WEP Key = 00000000000000000000000000

DHCP/BOOTP = 1

RARP = 1

IP Address = 0.0.0.0

Subnet Mask = 0.0.0.0

Default Gateway = 0.0.0.0

----------------------------------------------------------------

- You should write silex in first line of the file.

- A file edited incorrectly in notepad may be not supported.

- Each parameter is specified by parameter name = parameter and enter.

- The function is limited in using USB memory.

Configure Name Parameter

Wireless Mode 0:OldAdHoc, 1:AdHoc, 2:Infra

SSID

Channel 1--14

USE WEP 0:NONE, 1: 64bit, 2:128bit

WEP Key 10 or 26 line hex(0-9, a-f)

DHCP/BOOTP 0:Desable, 1:Enable

RARP 0:Desable, 1:Enable

IP Address 0.0.0.0-255.255.255.255

Subnet Musk 0.0.0.0-255.255.255.255

Default Gateway 0.0.0.0-255.255.255.255

Wireless

TCP/IP

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 100 101

Pas de commentaire

Silex technology Print/Scanner/Storage Wireless Server PRICOM C-6400W Guide d'installation Page 71