Silex technology Print/Scanner/Storage Wireless Server PRICOM C-6400W Guide d'installation télécharger pdf (Page 30)

3-3

Users Manual CX2

PRICOM User Software CX2

How to Communicate to the PRICOM C-6400W

Procedure for initial communication with the PRICOM C-6400W

The following explains how to initially communicate with the PRICOM C-6400W until the

wireless parameters are configured.

- 802.11 Ad hoc mode

The PC's wireless parameters must match the PRICOM C-6400W's.

Change the PC's wireless settings to match the default settings of the PRICOM C-6400W

which are:

Mode : AdHoc mode (802.11 Ad hoc mode)

SSID : GROUP

Channel : 11

WEP : (none)

- Infrastructure mode

The PRICOM C-6400W's wireless mode can be changed to Infrastructure by using the push

button. The PC's wireless settings and an access point will still need to match the default

settings of the PRICOM C-6400W.

- Refer to 2, PRICOM C-6400W - Start in Infrastructure mode for instructions on how to change

to infrastructure mode.

- If you configure to infrastructure mode, do not use WEP in your access point.

- If you cannot connect to the PRICOM C-6400W, initialize to factory default and try again.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 100 101

Pas de commentaire

Silex technology Print/Scanner/Storage Wireless Server PRICOM C-6400W Guide d'installation Page 30